Ridge Vents & Roof Ventilation in Georgia

We install soffit, gable & ridge vents for effective attic ventilation

It's understandable that roof ventilation is often overlooked, as most people are simply worried about their roof keeping their home dry. However, a well-ventilated roof can make life easier and better for those living beneath it. Proper roof and attic ventilation can lower heating and cooling costs, improve interior comfort, and grant a longer life to roof shingles.

In the summertime, a properly ventilated roof allows hot air in the attic to escape, reducing the demand on your air conditioning system. In the winter, ventilation combines with good attic insulation to keep the roof surface cold, so that snow won't melt on the roof surface and then freeze to form ice dams along the eaves.

Freedom Roofing Contractors installs and repairs ridge vents and other types of roof vents. We are West Central Georgia's expert roofing contractors for roofing solutions that include roof repair, roof replacement and more. Contact us for a free quote for ridge vent installation in Newnan, Peachtree City, Tyrone and throughout Georgia.

Types of Roof Vents

Proper roof ventilation helps regulate attic temperatures, reduce moisture buildup, and extend the life of your roofing system. Below are some of the most common types of roof vents used in residential homes.

Ridge vents

Installed along the roof peak, ridge vents are probably the most important vents in any "passive" (non-electric) roof ventilation system. Hot air that accumulates inside the attic rises by convection and escapes outside through ridge vents.

As hot air escapes, fresh outside air is drawn into the attic through soffit vents.

On an asphalt shingle roof, ridge vents are usually covered by a layer of shingles. The warmest air in the attic rises naturally to the roof peak and escapes outside through the ridge vents.

Soffit vents

Soffit vents are installed beneath the roof overhang along the eaves of the home. These intake vents allow cooler outside air to enter the attic and are an important part of a balanced roof ventilation system.

As warm air rises and escapes through ridge vents or other exhaust vents near the roof peak, soffit vents continuously draw fresh air into the attic. This airflow helps regulate attic temperatures and reduce moisture buildup that can contribute to mold, wood rot, and premature roof deterioration.

Soffit vents are commonly installed as continuous strip vents or evenly spaced vent panels. To function properly, they should remain unobstructed by insulation or debris inside the attic.

Gable-end vents

Gable vents installed near the roof peak help improve attic airflow while complementing the home's exterior design.

Gable-end vents are installed near the peak of a home's gable walls and help promote cross-ventilation inside the attic. Depending on wind direction and temperature conditions, these vents can function as either intake or exhaust vents.

Before ridge-and-soffit ventilation systems became common, gable vents were one of the primary methods used to ventilate attics. Today, they are often used alongside other passive ventilation components to improve airflow and help reduce trapped heat and moisture.

Most gable vents include protective screening to help keep out insects, birds, and debris. They are available in a variety of styles and materials, including wood, aluminum, and vinyl, allowing them to complement different architectural designs.

Powered attic ventilators (PAVs).

Sometimes referred to as attic fans, PAVs come in several forms. Some are designed to be mounted on the roof, while others mount in the attic floor or the gable end. All PAVs contain an electrically powered fan (usually controlled by a thermostat) that exhausts hot air from the attic on hot summer days.

A PAV should not be necessary if a roof has properly sized and installed ridge and soffit vents. While a PAV will definitely exhaust hot air from the attic during hot weather, it consumes electricity, and can actually suck cooled air from the living space through leaks in the attic floor.

For this reason, many home energy experts recommend passive roof ventilation over active ventilation with a PAV.

Add roof vents to ensure a long-lasting roof over your head

If your roof is not well-ventilated, ask a roofing contractor about improving roof ventilation with ridge, soffit or gable-end vents. All of these roof vents can be installed in an existing roof, or when your roofing is being replaced.

The specialists at Freedom Roofing Contractors can help you choose the right type of roof vents for your home. We can repair or install roof vents and improve your attic ventilation.

Our professional roofing services, including roof repair, are available throughout West Central Georgia, including Newnan, Peachtree City, Tyrone and nearby. Call us at 1-833-570-3535 to get a free quote on any of your roofing needs.

Looking for a price? Get a no cost, no obligation free estimate.